Pontiac Montana Trailer Wiring | etrailer.com

21 Jan 2015 | Author: | Comments Off on Pontiac Montana Trailer Wiring | etrailer.com
Pontiac Montana

Available Years for Pontiac Trailer Wiring

Pontiac Wiring Harness

Make a trailer wiring harness on Pontiac as easy as possible a custom fit wiring harness Draw-Tite, Curt, Pollak, Tow Bosal, or Hopkins. A custom kit eliminate or reduce the need to cut and wires in your Pontiac helping to protect sensitive

Pontiac Montana Custom Fit Wiring Videos

Today on 2006 Pontiac Montana we are to be installing wiring harness number 118396. We are at the rear of the with the cargo door and we want to go ahead and locate the that our wiring harness is to be plugging into. The ports are directly behind the taillight on the driver and passenger side. So the thing that we want to go and do is remove both taillight

Holding the taillight in place on the side are two torque headed We need to go ahead and take out. 0:38

Today on 1999 Pontiac Montana we are to install part number from Tow Ready. This is our T-1 harness. The first thing we to do is get in the back of the vehicle and get behind the panel on the driver side.

Pull out this panel here, there is this panel behind that, is the part we are going to have to Towards the back we should our connector that will up. 31

Pontiac Montana Custom Fit Wiring Questions and Answers

Pontiac Montana

you for detailing your considerable to troubleshoot the trailer lighting you are experiencing with your Pontiac Montana equipped Curt Tail Light # C55355. Since you have the trailer with other and it has worked properly then the would seem to have eliminated as the source of the problem. I suggest you check your manual to confirm how much is drawn by its lights. Curt Harness # C55355

Since the trailer lights fine on a different vehicle, I start looking at the trailer on the 2001 Pontiac Montana. If is any corrosion build up inside the then that can cause a connection and cause the issue you are If the vehicle side connector is out, you can go on to testing the converter

Start by testing the wiring into the converter from the using a circuit tester # 3808 if needed. If the wiring is co

For 2005 Pontiac Montana SV6 you want Tow Ready Custom Fit Wiring # 118396. I attached instructions and an installation video for product for you to check out also. The Custom Fit Vehicle Wiring # that you referenced is designed for the generation style Montanas and not work on your Montana

According to Tow Ready, on some with air compressors, the plugs not be accessible through the storage You would need to pull the interior trim panels to the connectors. So the T-One Vehicle Harness with 4 Pole Connector, # 118355, is the correct for your 2001 Pontiac .

I have included a link to the instructions below. I do not recommend the brake light wire the turn signal wire as it cause a

The Tow Ready Multi-Plug T-One Assembly, part # 20135 is a for Chrysler, Jeep, Freightliner and OEM trailer connectors. For your I would recommend using T-1 part # 118355 in conjunction part # ETBC7 if you are wanting to a brake controller. The Brake Install Kit, part # includes everything necessary to a brake controller, as well as the to convert the 4-pole provided by # 118335 to a 7-way.

Pontiac Montana
Pontiac Montana
Pontiac Montana
Pontiac Montana
Pontiac Montana
Tagged as:

Other articles of the category "Pontiac":

Our partners
Follow us
Contact us
Our contacts


Born in the USSR


About this site

For all questions about advertising, please contact listed on the site.

Car Catalog with specifications, pictures, ratings, reviews and discusssions about cars