Nissan 350Z – Turbo Magazine

19 Apr 2015 | Author: | Comments Off on Nissan 350Z – Turbo Magazine
Nissan 350Z

Injected’s 1,016whp Z Warps Our Fragile 3-D Reality

Cracking the 1,000whp mark with a stock block street engine is the stuff of legend. You don’t just fall into the four-digit Hall of Fame. Like a football team prepping for the big game, it takes three essential elements-scouting, a great game plan and flawless execution.

Anyone aiming to peg a dyno needs to know the inherent strengths and weaknesses of the chosen platform and how to best improve or enhance said platform. A keen knowledge of which parts and procedures will work as well as an understanding of turbo sizing and engine management are prerequisite qualities. Injected Performance’s Greg Baker from Lexington, Ky. built a show car and hit the trail with Hot Import Nights all the while drawing up a few wicked plays to get his 350Z to reach his four-digit horsepower goals.

We wanted to build a custom single turbo 350Z capable of 1,500 hp and truly push the limits of the VQ35 engine, Greg says. We wanted to explore what was needed to make the motor bulletproof as well as a quick drag car. By testing off-the-shelf as well as custom parts, we were able to discover quite a bit about the VQ35 as well as the 350Z.

This isn’t a stick on a turbo, dump fuel in it proposition. Such blocks must be diligently prepared for the abuse they’ll see as they spin the dyno rollers to terminal velocity. Greg yanked the VQ35DE and sent it off to Robert’s Precision Machine where it was honed and fitted with Darton sleeves and an Injected Performance billet main girdle.

The shortblock was filled with CP pistons and Brian Crower rods resulting in a VQ with displacement bumped up to 4.2-liters.

Nissan 350Z

The VQ is topped with Cosworth heads that feature extensive porting and polishing. Internally, Cosworth added its 1mm oversized valves (stainless intake, Inconel exhaust), titanium retainers and double valvesprings. The valvetrain is actuated by a set of 282-degree custom Injected Performance camshafts.

Once a fortified foundation is in place the tasks of moving the air and fuel necessary to make 1,000 hp at the wheels can be addressed.

Injected Performance went big here signing up a Garrett GT4788R, the second biggest turbo in the Garrett lineup to the GT55. The GT4788R uses massive wheels, 88mm on the compressor side and 92.7mm on the turbine side, to move big air. A testament to the bigness of the turbo system is its use of two 44mm TiAL Sport wastegates, a 5-inch downpipe and a 4-inch exhaust system to move high volumes of spent gases.

The large-frame turbo is secured via custom stainless steel turbo headers with 1.5-inch runners and meaty flanges. There is very little room for a large single or large twin turbos to fit in the 350Z engine bay, Greg says. We were able to overcome this challenge by building a custom front tubular radiator support to replace the stock fiberglass one.

By doing so, we provided quite a bit of room to work around VQ accessories, a turbo that is able to withstand 1,500 hp and provide quick access to everything.

The Z also runs a 75-shot nitrous system from Nitrous Express. At first glance a 75 shot is a drop in the bucket for an engine aiming for four digits. We installed a 75 shot on the car just to bring it up on the converter at the dragstrip, Greg says.

I thought about increasing the shot as our goal is to make 1,300 whp, which the turbo can do on its own, but the car is launching so well with a 75 shot that I didn’t want to change it.

Nissan 350Z
Nissan 350Z
Nissan 350Z
Nissan 350Z
Nissan 350Z
Nissan 350Z
Nissan 350Z
Nissan 350Z
Nissan 350Z
Tagged as:

Other articles of the category "Nissan":

Our partners
Follow us
Contact us
Our contacts

Born in the USSR


About this site

For all questions about advertising, please contact listed on the site.

Car Catalog with specifications, pictures, ratings, reviews and discusssions about cars