Daewoo nubira – Fixya

3 Oct 2014 | Author: | Comments Off on Daewoo nubira – Fixya
Daewoo Nubira

6 Suggested Solutions Relevant solutions from other related problems that we feel might be a fix.

Instructions Difficulty: Moderate Things You’ll Need: Set of ¼-inch drive sockets ¼-inch drive ratchet Set of ½-inch drive sockets ½-inch drive ratchet Set of 3/8-inch drive sockets 3/8-inch drive ratchet Set of metric wrenches Floor jack Jack stands

Step 1 Raise and support the vehicle on jack stands. Remove the intake air temperature wiring, the breather hose and intake air hose. Take off the air cleaner assembly.

Step 2 Remove the right wheel. Remove the accessory belts. Remove the crankshaft bolt and the crankshaft pulley. Remove the power steering bolts and the timing belt covers.

Temporarily install the crankshaft bolt and turn the engine clockwise until the mark on the crankshaft pulley, which is a triangle stamped into the crank sprocket, is aligned with the corresponding triangular mark on the block. Step 3 Make sure that the timing marks are aligned on the camshaft sprockets. These are a line on each sprocket that runs through a tooth on each sprocket. These lines should line up in the middle between each sprocket and point toward each other.

If they do not line up, turn the crankshaft one more time and they will line up. It takes two turns of the crank to one complete revolution of the cam. Step 4 Loosen the water pump bolts; using the 3/8-inch ratchet, turn the water pump clockwise away from the belt and loosely tighten the bolts to keep it there. Remove the timing belt.

Make sure the timing marks are aligned and install the new belt starting on the right side from the crank sprocket and working counterclockwise. Keep all the belt tension on the right side away from the tensioner. Step 5 Loosen the bolts in the water pump and rotate the water pump counterclockwise to apply tension to the belt. Watch the tensioner, which is above the water pump, and apply tension with the water pump until the pointer on the tensioner lines up with the notch above it.

Lightly tighten the water-pump bolts. Step 6 Turn the engine two more times and align the timing marks perfectly. Loosen the water-pump bolts and, using the ratchet, apply tension to the belt until the tensioner pointers are aligned.

Tighten the water-pump bolts. Step 7 Install the timing-belt covers and the bolts in the power-steering pump and tighten. Remove the crankshaft bolt and install the crank pulley and the bolt, then torque the crankshaft pulley bolt to 70 foot pounds of torque.

Install all components in reverse order of removal.

on the front under timing belt cover ,back cam ,if its not their then back of head about 3inches along from the gear wheel end

my daewoo nubira sedan year 2000 model will not start foe some reason i try to hit the button on my immobilizer to switch it off but it does nothing and that red light near the dash keeps flashing anyone no how to solve this problem?

Daewoo Nubira

My sincere apologies for the delayed response.

I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

Daewoo Nubira
Daewoo Nubira
Daewoo Nubira
Daewoo Nubira
Daewoo Nubira
Daewoo Nubira
Daewoo Nubira
Daewoo Nubira
Daewoo Nubira
Tagged as:

Other articles of the category "Daewoo":

Twitter-news
Our partners
Follow us
Contact us
Our contacts

dima911@gmail.com

Born in the USSR

423360519

About this site

For all questions about advertising, please contact listed on the site.


Car Catalog with specifications, pictures, ratings, reviews and discusssions about cars