BYD F3 comfortable type _

28 Aug 2014 | Author: | Comments Off on BYD F3 comfortable type _


comfortable type

BYD F3 comfortable type

After the 195/60R15 tire specifications

The minimum ground clearance (mm) 170

Minimum turning diameter (mm) 10.2

Engine parameter

Engine type inline four cylinder, water-cooled, DOHC

Engine type Mitsubishi 4G18

The overall feeling though performance moderation

See to it.

At least in the details section does not appear as some competitors that have obvious flaws

BYD F3 comfortable type manual transmission models equipped with Mitsubishi 4G15S engine

With 1.5L gold output

The maximum power is up to 78KW

In the vehicle configuration more effort

Not only have the CD player and FM radio

The interior was also trying to create a luxurious style

Using the advanced perforated leather car seat

But the driver seat can be adjusted in multiple directions

Will greatly ease the fatigue of drivers on the long journey.

To make you more comfortable in the journey process


BYD F3 comfortable type power with high efficiency and low energy consumption of mature and stable Mitsubishi 4G18 engine

1.6 liter engines

This engine is also used in Hafei horse racing

Ese models

But there are subtle differences in the external characteristics of the engine specific values

The manufacturers of this engine propaganda points are concentrated in low fuel consumption and utility

To ensure the BYD F3 comfortable type of Euro III emission standard

The 4G18 engine is developed Mitsubishi 96 years, belong to The SOHC engine

Because of its compact structure

Large power

The engine compartment easy layout

The lightweight requirements

Not only reduce the vehicle weight

And the acceleration and passing is improved. In fact carefully compare

4G18 power and do not have much technical superiority

16 valve SOHC

SOHC ) structure


Let the maximum power is only 73 kilowatts

Maximum torque is only 133-134 NM

The performance of such in any case is not up to the current domestic mainstream standard 1.6L parameters

But the 4G18 in addition to mature technology and good reliability and

Its biggest characteristic is saving

Because of the Mitsubishi specific MVV

The vertical eddy lean combustion


The mixed gas in the interaction of inlet baffle plate and longitudinal vortex control piston.

The formation of a vertical vortex in the cylinder

The concentration of the mixed gas in the cylinder can reduce gradually from the inside to the outside

Then the ECU adjusts the ignition time

The flame propagation velocity in cylinder fast

To improve the thermal efficiency of the engine through this

Reduce fuel consumption

The engine compression ratio is 9.5 4G18

In the range of relatively low.

It can adapt to the situation of domestic oil products

So to the 4G18 engine has a strong adaptive ability

3 comfortable type front suspension design using a relatively simple architecture

Low cost Mcpherson independent suspension


Tagged as:

Other articles of the category "BYD":

Our partners
Follow us
Contact us
Our contacts

Born in the USSR


About this site

For all questions about advertising, please contact listed on the site.

Car Catalog with specifications, pictures, ratings, reviews and discusssions about cars