Body Kits – PEUGEOT 406 COUPE BODY KIT Tuning Styling

23 Feb 2015 | Author: | Comments Off on Body Kits – PEUGEOT 406 COUPE BODY KIT Tuning Styling

Body Kits – 406 COUPE BODY KIT Tuning

Click here to Visit Catalogue of Peugeot 406 Coupe Kits: New PEUGEOT 406 BODY KIT

1. PEUGEOT 406 COUPE KIT FRONT BUMPER This is part of the feria kit complete unit high quality

2. 406 Coupe BODY KIT Front Pair – Evo

3. Peugeot 406 Coupe BODY KIT Bumper – Evo 3443-e

4. 406 Coupe TUNING BODY KIT Bumper – Speed

5. Peugeot 406 Coupe Side SET – Boost BODY KIT

6. 406 Coupe Side Skirt SET Evo 3444-e

7. Peugeot 406 Saloon Bumper – Torque

How to Install a Body Kit If you’re in saving some money you can a body kit yourself instead of a professional. Here are some instructions on installing a kit yourself:

Starting: It is important that you before starting, that you how to properly clean and prep the where you will be installing the new Here is a quick guide:

Peugeot 406

Use a and either grease remover or thinner to clean and thoroughly dirt and grime from the area of the car where you be applying the sided tape. Once finished cleaning, use an adequate of adhesion promoter to apply a coat to the surface where you be applying the tape. Make the adhesion promoter has enough to dry before attempting to install any

Now that you understand how to prep the we can begin the installation. First you need a few tools.

What you for the installation:

* the body kit (of course) * grease or lacquer thinner * clean * adhesion promoter * double tape * drill and drill of various sizes * sander or * you may need additional screws on the vehicle and body kit.

It is that you have all of the parts before installing them on the unless, of course, you intend on your entire vehicle.

the front bumper: To install the bumper, first remove the bumper, making sure to and hardware such as screws or pieces. If the styrofoam insert not fit into the new bumper you will not be to use it. Make sure to pre-fit the new on the vehicle to see if there are any alignment After confirming the fit, you need to make adjustments to the new by sanding or grinding until you a proper fit.

Once the bumper fits use the old bumper as a guide/template and duplicate any on the new bumper by using a drill. finishing drilling, you can use the existing to complete the installation of the new bumper.

The installation procedure is pretty the same for the rear bumper and skirts. Just follow the steps as described for the front

Peugeot 406
Peugeot 406
Peugeot 406
Peugeot 406
Peugeot 406
Peugeot 406
Peugeot 406
Tagged as:

Other articles of the category "Peugeot":

Our partners
Follow us
Contact us
Our contacts

Born in the USSR


About this site

For all questions about advertising, please contact listed on the site.

Car Catalog with specifications, pictures, ratings, reviews and discusssions about cars